Compare TNB bills by kWh per day

Divide the billed kilowatt-hours by the days in that same billing period to compare electricity per day. A longer bill can show more kWh even when daily usage is unchanged. Use the dates and day count supplied on the bill for the energy figure you are comparing. Homi Solar Malaysia recommends checking the meter and the reading type before drawing a conclusion.
Keep the same measurement
The Energy Commission’s interval billing guideline describes average daily usage in terms of the billing period. The arithmetic here compares energy only. Keep the same account and meter register. For a home with solar, billed grid imports may omit solar electricity used directly in the home. Compare import with import. Use a separately checked load profile if you need total site usage.
Compare periods of different lengths
Hypothetical example with compatible actual readings. The invented amounts use the same measurement in all three periods.
| Period | Billing days | Billed kWh | kWh per day |
|---|---|---|---|
| A | 28 | 280 | 10 |
| B | 31 | 310 | 10 |
| C | 30 | 330 | 11 |
From A to B the total rises by 30 kWh, but both average 10 kWh per day. Period C averages 11 kWh per day, so check what changed during that period. For a combined baseline across A and B, add the energy and days first. In this example, 590 kWh divided by 59 days gives 10 kWh per day.

Check estimates before relying on the average
The Energy Commission’s consumer FAQ explains that a licensee may estimate a bill using previous usage if it cannot take a meter reading. You can still calculate a daily figure, but mark it as estimated. Ask the licensee for the actual reading and clarification if a later bill includes an adjustment. Check that a combined baseline counts each day once, especially if a later statement revises a period.
Five checks for your records
- Record each bill’s measurement dates, billed days and kWh.
- Keep actual, estimated and adjusted figures identifiable.
- Use the same meter register and compare similar occupancy or operating periods.
- Note changes such as holidays, air conditioning, renovation and EV charging.
- For solar planning, add a daytime profile when available. TNB describes smart meter daily or interval views in its 2026 Smart Grid Index report.
References checked on 18 November 2026. This guide uses TNB examples for Peninsular Malaysia. In Sabah and Sarawak, use your own provider’s date labels and ask it about estimates or corrections. For a solar planning conversation, reach the Homi Solar Malaysia team or see solar services. Share only summary totals at first. Keep bills, account numbers, addresses and identifying screenshots out of public comments and AI tools.
Common questions
Should I divide by 30 every time?
Use the billing days for the amount shown. A 30-day estimate is only useful if you label it as a separate estimate.
Can I include an estimated bill?
Flag it separately and confirm the actual reading or revised period before using it for decisions.
Why did my bill rise if my daily kWh stayed the same?
A longer billing period can raise the total kWh. Check the separate charge lines and ask your provider about a specific amount.
Is kWh per day enough to size solar?
It helps establish a baseline. A design also needs the daytime load pattern, site constraints and a check of what the meter measures.
Sources checked
- Guidelines on the Implementation of Interval Billing Mechanism — Suruhanjaya Tenaga
- I only receive an estimated bill from the licensee — Suruhanjaya Tenaga
- TNB Smart Grid Index Report 2026 — Tenaga Nasional Berhad
This article reflects official information checked on 18 November 2026 and is general guidance. Programme rules, tariff treatment, approval and actual savings remain subject to the latest PETRA, SEDA, Energy Commission and TNB requirements plus the property bill, roof and usage pattern.
Related guides
Want HOMI to review your TNB bill?
Send your usage pattern and HOMI can estimate whether Solar ATAP makes sense for your home or business.
Discuss Your Daily Usage

